1321 Results for "Eurorack"

Future Sound Systems OSC2: DNA scissoring, VCA gluing Recombination Engine

From the laboratories of Future Sound Systems comes the Recombination Engine they are calling OSC2. It's a wizard 3 oscillator jumble of interconnected positive and negative waves.

Behringer Eurorack Go 280HP case ready for preorder

The super-wide Behringer Eurorack Go case is now available for preorder and includes an internal 5 amp power supply with 32 bus power sockets for £230.

LA67 WFM Oscillator for Eurorack with Kobol inspired continuously variable wave shaping

The WFM is a WaveForm Morphing analogue oscillator based in part on the 1970s RSF Kobol synthesizer with its sweepable wave shapes and offers FM and AM and can become complex if you add a another one.

Noise Lab about to release a range of new Eurorack modules

Noise Lab out of Stockholm has 6 Eurorack modules ready for release including an Analog VCO, Wave Shaper, Interpolating Scanner, Dual Mode Filter, Envelope and Dual VCA.

Erica Synths Pico Drive: wavefolding overdrive packed into 3HP

The latest module in Erica Synth's Pico range is the Pico DRIVE that folds waves into overdrive with 3 knobs, 4 patch sockets and a whole lot of bad attitude.

SoundForce Dual ADSR module loops, smooths and acts like a Juno

Built on an ARM micro-controller the SoundForce Dual ADSR module is very smooth, CV controlled, individually loopable and reflects their Juno obsession.

ADDAC System 106 T-Noiseworks snare and hi-hat generator

Finishing off their T-Networks series of modules based on vintage drum machine technology the ADDAC106 pumps 4-channels of noise into the circuit for some snare and hi-hat action.

Dual and Quad VCA modules in “Kosmo” Eurorack from Look Mum No Computer

Sam Battle of Look Mum No Computer has released his latest VCA modules. The 1181 Dual VCA and 1183/1184 Quad VCA are available as PCB/Panel kits in the overlarge Kosmo Eurorack format.

TABØR: Analogue rhythmic car crash oscillator with a glowing orb of destruction

TABØR kicks off like some kind of steam-punk spaceship spluttering into life and pulsing sound and light at you as it screams and thuds its way into orbit. This is going to be epic.

PER|FORMER open source DIY 8-track Eurorack sequencer

PER|FORMER is a stunning looking open source project from Simon Kallweit (AKA Westlicht). It's an 8-track step-sequencer for Eurorack designed for composition and live performance.

Starling Via SYNC3, OSC3 and ATSR Eurorack modules emerge from shared hardware platform

Starling debuts three new modules in its "Via" family based on the same hardware platform exported from VCV Rack. They're complex, fascinating and full of possibilities if you can fathom them out.

Zzzorb: four-pole multimode filter with a linear VCA for extra Zzzing

Alright Devices has released Zzzorb a rather cute looking 4-pole filter with 5 simultaneous filter outputs and a built-in VCA for volume, tremolo or feedback self-modulation.

Get Voltage Modular Nucleus with 22 modules completely free!

Cherry Audio has announced that their entry-level version of Voltage Modular is now free to download. It comes with 22 modules that you can patch together in a virtual Eurorack. Normally it costs €29.

BOBA FAT dual analog drum generator for bad-ass kicks, bass and toms plus a Hi-Hat module

Bounty hunting for the ideal kick has just got a lot easier with the beefy BOBA FAT dual analog drum generator and check out the companion HH noise generator for some high-frequency hats.

КОСМИЧЕСКИЙ ШУМ: Soviet cyberpunk Space Noise module from Paratek

Now for something completely bonkers! КОСМИЧЕСКИЙ ШУМ or "Space Noise" is from Russian based Paratek and is what you get when you stuff two Hexinverter Jupiter Storms into a single cosmic module.

Low Gain Electronics DubMatrix is a 5 by 5 matrix mixer for audio and CV

The DubMatrix will mix both audio and CV signals with 5 channels in through a 5x5 mixing matrix and out of 5 outputs. There's all sorts of scope for strange waveforms and surprising audio signals.

Watch this unmissable introduction to modular synthesizers by Zoë Blade.

Got an hour to spare? Sit down and watch Zoë Blade's informative, watchable and utterly charming modular synthesis 101. Even pros will find some interesting stuff here that they may not have known.

Superbooth 2020: Urs Heckmann to reveal Wiretap – an auto-gating Eurorack module

Urs Heckmann from software synthesizer company U-he is booked for a live performance at Superbooth 20. It says that the performance is with Wiretap which we've never heard of before.

Intellijel squeezes delay, reverb and chorus into the Multi-FX 1U Eurorack module

Fancy a bunch of effects in a neat 1U module? Then check out the Intellijel Multi-FX 1U for some carefully crafted and nicely musical effects to take your modular blips to another dimension.

Mutable Instruments drops a new firmware for Marbles

In a time of chaos when all around you are losing their Marbles a wise woman will remind us that beauty exists in the world of electronic music and it's called the "Super Lock" feature.

Squarp Rample: 4-voice sample machine for endless sound in your Eurorack

Squarp Instruments has officially announced Rample. It's a 4-voice Eurorack sample player and effects processor with no duration limit that can playback both sampled audio files and control voltage.

Ratchet: Eurorack drum brain for deep thinking rhythms from Schottkey Modular

Ratchet is the first module from Lia Harmon of Schottkey Modular and it's an impressively deep dive into the nature of beat making and rhythm composing in Eurorack.

Boost your NerdSEQ with the More CV 16 Expander

The More CV 16 Expander boosts the NerdSEQ tracker's output possibilities with 16 more CV outputs. That's more notes, more modulation and more polyphony in your Eurorack.

Electrosmith Daisy: An open source board that can run a synth, a pedal or a module

We saw the Electrosmith Daisy at NAMM and now it's ready for some Kickstarter action. Daisy is an embedded platform for music that can be an effects pedal, a Eurorack module or a synth.