1337 Results for "Eurorack"

ADDAC217 Quad Gate-to-Trigger for firing things properly

We often see Gates and Triggers as the same but when firing envelopes or drum modules it can really make a difference. The ADDAC217 will ensure a short sharp trigger hits all the right places.

ADDAC604 Dual Filter pulled from the guts of the 4 Voice Cluster

Pulling the filter out of the ADDAC105 4 Voice Cluster because it sounded so good and deserved to be a module in its own right. The ADDAC604 Dual Filter offers two mono or a stereo multimode filter.

Behringer reveals a useful 3-tier Eurorack stand for their 104HP case and synths

Behringer is releasing a handy 3-tier bracket that will fit all their semi-modular synths at both 70 HP and 80 HP and the 104HP Eurorack case.

NAMM 2020: ElectroSmith Daisy microcomputer audio development platform

Electrosmith's Daisy is a development platform for audio applications. It's like an Arduino but designed for audio use. You can run it on a breadboard or in their Euro, pedal and synth test platforms.

NAMM 2020: Cre8audio gives the NiftyCASE Ears to take it to two tiers

Cre8audio has been spotted with a two-tier stand for their NiftyCASE Eurorack case. They are calling it the NiftyCASE Ears and could make it the perfect place for some Roland or Moog Modular clones.

NAMM 2020: Verbos Electronics introduces 3 new compact modules

Verbos Electronics brought along their new Foundation Oscillator, a Noise & Filter module and Amp & Tone looking gorgeous and unusually compact in their trademark silver, black and red.

NAMM 2020: Behringer introduces System 55 modular system Moog clones

Behringer has reproduced over 20 modules from the System 55, System 35 and Model 15 series Moog modular and put them into the Eurorack modular format.

NAMM 2020: Animal Factory Amplification Orobas dual-channel vacuum tube VCA

Out of the minds of the Animal Factory comes Orobas a dual channel vacuum tube VCA and saturator Eurorack module that has a load of stuff going on. Now with video!

NAMM 2020: Behringer releases the System 100 Eurorack modules

These are authentic reproductions of the Roland System 100M modules from 1974 in Eurorack compatible form. There are 11 in total covering VCOs, filters, envelopes, VCAs, modulation, effects and more.

NAMM 2020: Pittsburgh Modular Lifeforms SV-1b refreshes their best-selling synth

Pittsburgh Modular has moved to a new look for all their modules reflected in the Voltage Control Lab. This has now reached the Lifeforms SV-1, their best selling BlackBox modular synthesizer.

NAMM 2020: Pittsburgh Modular Lifeforms Cascading Delay Network

Pittsburgh Modular's Lifeforms Cascading Delay Network stitches together 4 delay units in new and interesting ways with 5 cascading modes and 7 feedback pathways to delay crazy town.

NAMM 2020: EarthQuaker Devices brings Afterneath other-worldly reverb to Eurorack

Afterneath has been making weird reverb sounds as a guitar pedal for some time but now it's found itself in Eurorack with an expanded feature set for added strangeness.

NAMM 2020: Qu-Bit reveals Aurora, Data Bender, Surface and Cascade modules

Qu-Bit has 4 new modules to check out. Aurora is a spectral reverb, Data Bender is a circuit-bent audio buffer, Surface is a physical modelling voice & Cascade is a ratcheting envelope. Now with video

NAMM 2020: 3 new modules from 2HP – Loop, Comp and Pitch

Along with their fabulous Lunchbox Eurorack case release, 2HP also have three deliciously simple new modules: Loop, Comp and Pitch.

WMD single panel Performance Mixer LE for Eurorack

WMD has produced a limited run of a single panel Performance Mixer LE. It combines the Performance Mixer along with the PM Channels channel expander into a single, black 40HP module.

NAMM 2020: Doepfer debuts the A-111-6 Mini Synth Voice and an enormous joystick

The A-111-6 Miniature Synthesizer Voice is now out and they have a huge 3D Joystick, an 8 channel VCA, a Dual VC Polarizer/Ring Modulator and a Quad Level Shifter/Clock/Gate/Trigger buffer.

NAMM 2020: 2HP Lunchbox portable modular systems

Super-thin Eurorack module makers 2HP has announced a very cool little Lunchbox modular case that can come standalone or packed with their modules in custom configurations.

NAMM 2020: Noise Engineering unveil three new modules: Virt Iter, Univer Inter and Desmodus Versio

Noise Engineering announces three new modules: Virt Iter is a stereo oscillator, Univer Inter a MIDI-to-CV converter and Desmodus Versio is a stereo reverb. Only a few details so far...

NAMM 2020: Behringer teases a Moog 921 VCO modular clone.

Another day another tease video from Behringer. This time we go into a spin above a knob that seems to match up to the Moog 921 voltage controlled oscillator.

NAMM 2020: Bastl Instruments and Casper Electronics Waver wavefolding drone mixer

In my view, Casper Electronics and Bastl Instruments bring out the best in each other. This latest collaboration called Wave is a wave folding drone mixer.

NAMM 2020: 4ms Ensemble Oscillator brings 16 oscillators into your Eurorack

Designed in collaboration with Matthias Puech the Ensemble Oscillator contains 16 sine wave oscillators, 3 wavefolders, 3 distortions and 3 patterns of cross modulating FM.

NAMM 2020: Empress Effects reveals ZOIA Euroburo for Eurorack

The coolest modular synthesizer and effects processor ever found in a pedal has migrated to Eurorack as the ZOIA Euroburo and nothing will ever be the same.

NAMM 2020: Frap Tools Brenso Complex Oscillator of woven articulations

Brenso brings together complex oscillating ideas of brevity and intensity, of weaving threads, discovering clarity and managing the possibilities in the sonic options. Lovely! Now with video.

Tenderfoot Quad Quantizer will make your modular musical

Tenderfoot has released a very affordable Quad Quantizer module for Eurorack that offers 4 channels of musical output, transposition and an innovative sample and hold feature.